- Auto Lighting System[1]
- Car Black Box[1]
- Navigation & GPS[1]
- Laptops[3]
- Scanners[1]
- Dental Equipments[2]
- LED Flashlights[2]
- LED Lamps[1]
- Laptop Bags[1]
- Mobile Phone Bags & Cases[9]
- Microscopes[6]
- Laser Pointers[32]
- CCTV Camera[2]
- CCTV DVR[30]
- Smoke Detector[4]
- Telephone Headsets[1]
- Mobile Phones[8]
- Wristwatches[2]
Home safety Carbon Monoxide Poisoning Gas Sensor Alarm Detector, BGT003
Home Safety Carbon Monoxide Alarm
Green & Red & Yellow LED
Size: 10x4cm
Factory Price
co Carbon Monoxide Poisoning Gas Sensor Alarm Detector
Description:
• Color: White
• Sensor: Electrochemical CO sensor
• Alarm Style: Per EN50291
• Sensitivity/Alarm Time:
Within 60~90 minutes at 50ppm CO concentration;
Within 10~40 minutes at 100ppm CO concentration;
Within 3 minutes at 300ppm CO concentration
• LCD Displayer (optional): 4 digits LCD displayer
• Audibility: 85dB ( at 1m distance ), Frequency 3 - 0.5KHZ
• Standby Current: <50µA
• Alarm Current: <50mA
• Standby Mode: Green Led flashes once every 30 seconds
• Alarm Mode : Red Led quickly flashes 4 times with unit chirping every 5 seconds, then repeat,
• Low-bat Indicator:
Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD
• Mal-function Indicator:
Chirp every 30s with green LED out and Err on LCD
• Power consumption: 0.3mW
• Size: 10 x 4cm
• Powered By: 3 x AA Batteries (Not included)
• A perfect item for protecting your family from the dangers of carbon monoxide
• Advanced level of protection, easy to read with the digital display, even in low light conditions
• Displays the level of carbon monoxide the unit is sensing
• Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
• Red LED : When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
• Test/Reset button is designed for weekly testing if it works properly and reset the unit during CO alarm
• Alerts users when batteries needs to be replaced
• This alarm is highly recommended to be mounted on a wall surface
• Compact, lightweight & easy to operate